$75.00 Free shipping
Tags: led video controller, led triangle, led controller programmable, Cheap led video controller, High Quality led triangle, China led controller programmable Suppliers.
DMX512 RGB LED CONTROLLER for 240V RGB led neon flex, DIY lighting controller system
Feature of this LED DMX RGB controller :
This multi-functions controller which has LCD indicating is specially designed to be used exclusively with LED lighting, it?s output has four wires three channels (common-anode).
2X16 bit LCD indicating it?s working conditions
Aluminum alloy housing is for heat spreading directly.
DMX digital addresses setting and power off protecting
Working style: (master and slaver connecting modeDMX modeIndependent mode)
Grey glass 255 scale adjustable.
Built in 8 sorts operating programme.
Compatible with DMX512 signal,such as DMX 512 control.
DMX dimmable and independent dimmable by pressing key
It can be used same time when it was set as master and slaver connecting in huge power occasion
Input Voltage: AC230V/50HZ
Output Voltage: 230V
Output power rate: 2000W/230V
Output Connector: 4 channels. 4-pin cables
Communication port:DMX512 series communicate port(three pin connectror,1:earth2:Data-3:Data+)
Working temperature: -20C~+45C,10%~90%RH
Net Weight: 1.1Kg
Dimension: L159mm * W118mm * H57mm
Housing material: Silvery/black painted steel and aluminum alloy for alternative
Panel of Controller :
Key indicating:: "MODE" key : programme setting "SETUP" key : Sub-menu "Up"key : data + "DOWN" key : data- OUT :4 channels for output DMX IN :DMX input port DMX OUT :DMX output port POWER :power input
Programme Setting :
Press "SETUP" key, then it can be changed circle from sub-menu, speed, auto-running times ,the position of cursor flashing is the item which is to be setting now,then it can be changed the value by press "UP" or "DOWN"
Then it\'s working condition is master status.
For example: LCD indicating ? 09.COLOR FADE SPEED/001 NUM/08? 09.COLOR FADE: 9 th sub-programme,color fade. SPEED/001: Value of speed is 1 NUM/08: It can be run into next program after 8 times circles in auto run program .
It can run automatically according to default programs,then it?s working condition is master, The ?NUM?(circle times) can be set ?0? if you intend to cut any sub-program for running in this mode.
DMX address setting :
Address scope:1-512,press ?UP? for data+,press ?DOWN? for data-, when the DMX signal arrived,?POWER? indicated lamp would be flash.
Slave mode :
Selecting ? SLAVE MODE ?, then it works as slave mode,synchronizing with master.
Double speed setting :
CH.: Adjusting double speed when it works under jumping changing program value from 1-2551 is fastest speed,255 is slowest
SLOW: Adjusting double speed when it works under fadeing changing program, value from 1-255
l DMX operating details:
It can receive 4 channels DMX signals,CH1is the beginning channel?SETUP??UP??DOWN? will not work under DMX mode.
The 1 st way DMX:program selecting
The 2 nd way DMX:speed grade adjustment, it equal ?R? push bar in DMX console
The 3 rd way DMX:it equal ?G? push bar in DMX console .
The forth way DMX:It equal ?B? push bar in DMX console
SPEED/XXX:XXX is speed value
Num/XX:XX is times in auto run mode
N/X: X is the times in auto run.
C1/R:it is the 1 st color in two color change mode,total 8 sorts.
C2/G:it is the 2 nd color in two color change mode, total 8 sorts
R/XXX:XXX is the R value(000-255)in dimmer mode
G/XXX:XXX is the G value (000-255)in dimmer mode
B/XXX:XXX is the B value(000-255) in dimmer mode.
The repairment and replacement must be carried out by qualified electrician.
The working condition should be under temperature -20C~+45C,10%~90%RH,no congelation,so as to ensure it?s lifetime
It must be turn off at the repairment and replacement that a protection against electric shock and short circuit are provided
Please assembling back all the parts correctly after repairing,it must be ensure that electrical and configure all conform requirements prior connecting load.
It can?t be covered by any superstratum, it should be swept periodly to prevent dust
Keeping the controller away from temperature sensitive equipments,due to shell surface of controller would be more high temperature when it is working
This instruction is exclusive suit for our factory model, it would not be noticed